2026 HS Codes for Lifting and Rigging Products

Executive Summary: HS Codes for Lifting and Rigging Products (2026)

HS Codes for Lifting and Rigging Products play a critical role in international trade and form the foundation for customs clearance, duty assessment, regulatory compliance, and supply-chain risk control. For manufacturers, purchasers, and international traders operating in the lifting and rigging industry, accurate HS code classification is a core operational requirement rather than an administrative formality.

This report provides a structured overview of key lifting and rigging products together with their corresponding 2026 HS Codes. The classifications are based on standard international customs practices and commonly accepted product definitions. Drawing on more than a decade of industry experience, KNKT has compiled these HS code references to support purchasers and importers in preparing customs documentation and evaluating classification consistency. The content reflects practical manufacturing and trade experience across global markets.

HS Codes for Lifting and Rigging Products: Quick Use Guide

Use this guide to match common lifting and rigging products to typical HS code classifications. Always confirm final codes using product specifications and local customs rules.

HS Code Quick Navigation (Products)

HS Code Classification Principles for Lifting and Rigging Products

Customs authorities determine HS codes by evaluating a product’s primary function, material composition, degree of assembly, and typical declaration practices in international trade. In the lifting and rigging sector, even minor differences in structure, configuration, or intended use may result in different classification outcomes.

For this reason, the HS codes presented in this report should be regarded as practical reference points rather than absolute determinations. Importers and suppliers should always review detailed product specifications and confirm final classification in accordance with local customs requirements.

Regional HS Notes (EU / US / ASEAN)

In the European Union, HS codes are extended through the Combined Nomenclature (CN) to eight digits, with additional TARIC extensions applied where regulatory measures are involved. The HS codes listed in this report should be treated as reference points. Final CN or TARIC classification depends on product structure, material composition, function, and declaration status.

In the United States, HS classification is applied through the ten-digit Harmonized Tariff Schedule of the United States (HTSUS). While the first six digits align with the international HS framework, the remaining digits are country-specific. Classification outcomes often depend on whether a product is considered lifting machinery, a machinery part, or a general iron or steel article.

ASEAN member countries apply the ASEAN Harmonized Tariff Nomenclature (AHTN), typically at the eight-digit level, with additional national extensions. Classification practices may vary between member states, particularly for mixed-material assemblies and lifting accessories.

Ratchet Tie-Down Straps – HS Code 56075000

Ratchet tie down strap s are widely used for cargo securing during road, rail, and sea transportation. Manufacturers typically produce these products using high-strength polyester webbing combined with a mechanical ratcheting mechanism.

From a customs perspective, authorities generally classify these products as textile articles, as the webbing performs the primary securing function. Importers should clearly describe both the textile material and the securing application to avoid confusion with purely mechanical tensioning devices.

Webbing Slings (Flat Slings) – HS Code 56075000

Webbing slings lift loads by distributing weight across a broad surface area, helping to reduce damage to sensitive or finished goods. Customs classification mainly depends on the textile composition and the lifting function of the sling.

When declaring these products, procurement teams should confirm whether metal fittings are permanently attached, as detachable components may affect declaration details in certain markets.

Lifting Cargo Nets – HS Code 56081900

Lifting cargo nets handle bulk or irregularly shaped loads in construction, logistics, and industrial environments. Customs authorities usually classify these products as made-up textile articles based on net construction and intended use.

Clear descriptions of mesh structure, load application, and working environment support smoother customs review.

Twisted Yarn – HS Code 54011020

Twisted yarn serves as an intermediate industrial material used in the production of webbing slings, straps, and protective textile components. Classification focuses on the processing method and material type rather than final application.

Sewing Thread – HS Code 54011020

Industrial sewing thread supports the assembly of lifting and securing products. Import declarations should clearly distinguish industrial-grade sewing thread from household or decorative products to ensure correct classification.

Trailers (Non-Self-Propelled) – HS Code 87162000

Non-self-propelled trailers are used for cargo transport and logistics support. Customs authorities classify these products separately from lifting equipment due to their transportation function.

Manual Chain Hoists – HS Code 84253990

Manual chain hoists lift loads through hand-operated mechanical systems without electric or hydraulic power. Classification depends on confirming the non-powered nature of the equipment.

Accurate product descriptions help prevent misclassification under motorized lifting machinery headings.

Welded Steel Chains – HS Code 73158200

Welded steel chains are commonly used in lifting, rigging, and load-securing applications. Customs authorities evaluate welding method, chain construction, and intended use when confirming classification.

Processed Steel Chains – HS Code 73151200

Processed steel chains include chains manufactured through mechanical processing methods other than welding. Documentation should clearly identify the manufacturing process to support correct HS code application.

Anchor Chains – HS Code 73158900

Anchor chains are designed for marine and offshore environments. Their classification reflects specific usage conditions, including exposure to seawater and high loads.

Anchoring Equipment – HS Code 73089000

Anchoring equipment includes fabricated steel components used for anchoring and load-holding systems. Customs authorities typically classify these products as structural steel articles rather than lifting devices.

Lifting Beams – HS Code 73269019

Lifting beams are rigid load-spreading devices used to stabilize loads during lifting operations. Classification depends on fabrication level and whether the beam functions as a standalone lifting accessory.

Spreader Beams – HS Code 73269019

Spreader beams distribute lifting forces and reduce stress on loads. From a customs perspective, these products follow similar classification principles as lifting beams.

Shackles – HS Code 73269019.90

Shackles connect slings, chains, and lifting equipment. Customs authorities focus on material composition and structural design when determining classification.

Chain Shackles – HS Code 73269019.90

Chain shackles are designed specifically for use with chain sling assemblies. Their classification follows the same principles as general-purpose shackles.

Lifting Rings – HS Code 73269019.90

Lifting rings provide secure attachment points for lifting operations. Proper declaration should specify load rating and application.

Oilfield Lifting Rings – HS Code 73269019.90

Oilfield lifting rings are specialized components designed for oil and gas industry environments, where high loads and harsh conditions apply.

Metallurgical Clamps – HS Code 84269900

Metallurgical clamps handle steel plates, billets, and slabs in heavy industrial operations. Classification focuses on function and mechanical structure rather than material alone.

Special-Shaped Lifting Clamps – HS Code 84269900

Special-shaped lifting clamps address specific load geometries. Importers should provide clear technical descriptions to support classification as lifting machinery components.

Hoist Hooks – HS Code 84313900

Hoist hooks function as components of hoists and cranes. Customs authorities typically classify these products as parts of lifting machinery.

Pulley Hooks – HS Code 84313900

Pulley hooks integrate into pulley systems and follow the same classification approach as hoist hooks.

Turnbuckles – HS Code 84313900

Turnbuckles adjust tension in rigging systems. Classification often depends on whether the product forms part of a lifting assembly.

Chain Sling Assemblies – HS Code 84313900

Chain sling assemblies consist of chains, hooks, and connectors configured for lifting operations. Customs authorities usually classify these products as lifting machinery parts.

Lifting Clamp Accessories – HS Code 84313900

Accessories and spare parts for lifting clamps support lifting operations and are commonly classified as parts of lifting machinery.

Wire Rope Thimbles – HS Code 73269019

Wire rope thimbles protect rope eyes from abrasion and deformation. Customs classification focuses on material and structural form.

Wire Rope Clips – HS Code 84313900

Wire rope clips secure wire rope ends and form part of lifting or rigging assemblies. Clear identification of application helps avoid misclassification.

Winches – HS Code 84313900

Winches pull or lift loads through mechanical operation. Classification depends on whether the winch is designed as part of lifting machinery.

Metal End Fittings – HS Code 83081000

Metal end fittings serve as terminals for belts, ropes, and straps. Customs authorities classify these products based on material and fastening function.

Steel Wire Ropes – HS Code 73121000

Steel wire ropes consist of stranded steel wires used in lifting, hoisting, and securing applications. Classification focuses on wire construction and processing.

Wire Rope Slings – HS Code 73129000

Wire rope slings are assemblies made from steel wire ropes with spliced eyes or end fittings. Customs authorities consider assembly level and application when confirming classification.

Steel Tie Rods – HS Code 73089000

Steel tie rods act as structural load-bearing components in construction and heavy industrial projects. Proper documentation should emphasize structural application rather than lifting function.

Steel Structures – HS Code 73089000

Steel structures include fabricated components used in industrial, lifting, and construction environments. Classification depends on fabrication level and intended use.

Professional Summary

This white paper provides a practical, trade-oriented reference for HS Codes for Lifting and Rigging Products in 2026, organized to help procurement teams, importers, and suppliers quickly identify commonly used classifications and prepare consistent customs documentation.

The report follows a structured approach aligned with typical customs classification logic, emphasizing primary product function, material composition, and degree of assembly. It also highlights an important operational reality: in lifting and rigging, small differences in configuration, attached fittings, or declaration wording can materially change classification outcomes, clearance time, and duty exposure.

To support cross-border application, the document includes regional context for the EU, the US, and ASEAN. It clarifies that while the first six digits of HS codes provide the global framework, local extensions (CN/TARIC in the EU, HTSUS in the US, and AHTN plus national extensions in ASEAN) may influence the final code used in declarations and compliance checks.

Finally, the product-by-product sections translate the codes into real-world trade guidance by connecting each item’s common industry use with the key declaration points that customs and buyers typically review. As a result, the paper serves not only as a code list, but as a practical classification support tool aimed at reducing misclassification risk, improving clearance efficiency, and strengthening supply-chain reliability across global markets.

スリングベルトとラッシングベルトの違いは何ですか

April 21, 2024